2013

Archive for 2013

BRELOOM

Senin, 14 Oktober 2013

Posted by K

Add Comments

BRELOOM

286 / BRELOOM - Pokémon Papercraft
Name: Breloom
Type: Grass, Fighting
Species: Mushroom Pokémon
Height: 1.2 m (3' 11")
Weight: 39.2 kg (86.4 lbs)
Interesting Facts: Breloom closes in on its foe with light and sprightly footwork, then throws punches with its stretchy arms. This Pokémon's fighting technique puts boxers to shame. It evolves from Shroomish at level 23.

THE PAPER MODEL
Height: 7.6 cm/3 in
Width: 5.6 cm/2.2 in
Depth: 5.6 cm/2.2 in
No. of Pages: 1
Level: Easy

NOTES: -

Download: A4 / Letter

HITMONLEE

Posted by K

Add Comments

HITMONLEE

106 / HITMONLEE - Pokémon Papercraft
Name: Hitmonlee
Type: Fighting
Species: Kicking Pokémon
Height: 1.5m (4′11″)
Weight: 49.8kg (109.8 lbs)
Interesting Facts: Hitmonlee's leg muscles have the special ability to freely stretch and compress - in fact, it's legs can stretch double their length. First time opponents are often startled but the extent of their reach. Hitmonlee is a male-only species with no female counterpart.

THE PAPER MODEL
Height: 17.5cm / 7.2 in
Width: 10.6 cm/ 4.1 in
Depth: 14.6cm/ 5.7 in
No. of Pages: 6
Level: Hard

NOTES:This model is only relatively difficult in the respect that the limbs can be easily attached facing the wrong way. Building these particular parts in front of a PDO is crucial.

Download: A4 / Letter

GALLADE

Posted by K

Add Comments

GALLADE

475 / GALLADE - Pokémon Papercraft
Name: Gallade
Type: Psychic / Fighting
Species: Blade Pokémon
Height: 1.6 m (5′03″)
Weight: 52 kg (114.6 lbs.)
Interesting Facts: Gallade have a white lower body that consists of bold rounded hips with strong legs. The torso is thin and colored in a balance between the green of its upper body, and the white of its lower body. Sharp red hornlike protrusions stick out of the chest and back similar to Gardevoir. Gallade's arms are shaped like tonfas, with extendable blades in the elbows. His head resembles a gladiator's helmet, with a white face. Like his counterpart Gardevoir, Gallade has spikes on the sides of his face.
Gallade is male-only, evolving from a male Kirlia when exposed to the Dawn Stone.

THE PAPER MODEL
Height: 22 cm/8.66 in
Width: 15.4 cm/ 6 in
Depth: 16.3 cm/6.4 in
No. of Pages: 3
No. of Pieces: 43
Level: Easy / Medium

NOTES: Build the model following the numbers on the template. This model is really simple to assemble, with the exception of the fingers, which are tiny. In order to glue the crest to the head, first assemble part 40, and glue it on the head. Then assemble part 41, and glue it to both head and part 40. Do not glue parts 40-41 toghether before glueing them to the head, or you'll risk to spill glue onto it.

Download: A4 / Letter

RIOLU

Posted by K

Add Comments

RIOLU

447 / RIOLU - Pokémon Papercraft
Name: Riolu
Type: Fighting
Species: Emanation Pokémon
Height: 0.7 m (2′04″)
Weight: 20.2 kg (44.5 lbs.)
Interesting Facts: Riolu are sensitive to a special type of energy called Aura. Riolu's evolved form, Lucario, can use these waves to attack, or study these waves to predict the movements of their opponents, and use them to track anyone. However, Riolu does not have the ability to fully use these powers, although it can still emanate these waves to communicate and sense them - albeit only in "ripples" as opposed to the "waves" of energy its evolution can sense and guide. Most notably, it cannot learn Aura Sphere or Detect naturally, two moves that Lucario learns that are often attributed to its aura powers. Like almost all Fighting-type Pokémon, Riolu naturally has superhuman strength, stamina, and endurance and is capable of making long journeys on foot in a short amount of time.

THE PAPER MODEL
Height: 19,9 cm/7.8 in
Width: 11,9 cm/ 4.7 in
Depth: 14,3 cm/5.6 in
No. of Pages: 4
No. of Pieces: 49
Level: Medium

NOTES: This model is pretty straightforward, just follow the numbers on the template while building it. Using the pdo as reference will help a lot. It doesn't stand without a weight inside: I rolled a small scrap piece of paper and glued it inside Riolu's chest (front) in order to make it stand.

Download: A4 / Letter

BLAZIKEN

Posted by K

Add Comments

BLAZIKEN

257 / BLAZIKEN - Pokémon Papercraft
Name: Blaziken
Type: Fire/Fighting
Species: Blaze Pokémon
Height: 1.905 m (6'03")
Weight: 52.1 kg (114.6 lbs.)
Interesting Facts: Blaziken is mostly red in coloration, with accentuations of beige, yellow, and gray. Blaziken appears to have long, beige-colored, hairlike feathers extending behind its head, continuing downward to envelop some of its chest and abdomen. Blaziken’s small, red-colored face is almost completely covered in feathers. It has a crest on its head with two points, which resembles the letter "V". Blaziken has three spiky extensions on the sides of its face, much like Gardevoir’s. Blaziken’s eyes are semicircular in shape, with yellow scleras and blue irises, and Blaziken's mouth is a hooked beak. The continuation of the "hair" from its head on its chest and abdomen makes Blaziken appear as if it's wearing a sleeveless jacket on its torso. Blaziken’s strong, muscular legs give it immense lower body strength, helping its kicking and jumping abilities. Blaziken has three fingers on each hand, resembling that of a normal chicken’s feet, with what appears to be gray-colored wristband-like markings on its wrists. Blaziken has spur-like claws on the underside of its upper leg, and, although rarely seen due to the shaggy feathers on the bottom of its legs, three clawed toes. It can leap over a skyscraper with a single jump. It can make flames spout from its wrists and ankles, cloaking its feet or fists. The stronger the foe it faces, the more intensely its flames burn. It may also launch a fiery kick at the opponent.

THE PAPER MODEL
Height: 18.4 cm/7.25 in
Width: 18.6 cm/ 7.3 in
Depth: 15.5 cm/6.1 in
No. of Pages: 5 (4 if built without mirrored pieces)
No. of Pieces: 60
Level: Hard

NOTES: This isn't an exceptionally hard model for anyone with experience. Labeled hard for those who don't have very much experience. Build order included in download.

Download: A4 / Letter

MANKEY

Posted by K

Add Comments

fighting

MANKEY

056 / MANKEY - Pokémon Papercraft
Name: Mankey
Type: Fighting
Species: Pig Monkey Pokémon
Height: 0.5 m (1′08″)
Weight: 28.0 kg (61.7 lbs.)
Interesting Facts: Mankey has a similar color scheme to that of Meowth. Coincidentally, Mankey and Meowth are version exclusives in Red and Blue (Mankey being in Red, Meowth in Blue), along with Gold and Silver and their remakes (Mankey in Gold/HeartGold, Meowth in Silver/SoulSilver). It evolves into Primeape starting at level 28.

THE PAPER MODEL
Height: 16.5 cm/6.5 in
Width: 18.3 cm/ 7.2 in
Depth: 15.6 cm/ 6.1 in
Pages: 4
Pieces: 42
Level: Easy

NOTES: Start building from the nose, make your way through the face, arms, legs, tail, then close at the back. Be careful when building the hair tufts.

Download: A4 / Letter

POLIWRATH

Posted by K

Add Comments

fighting

POLIWRATH

062 / POLIWRATH - Pokémon Papercraft
Name: Poliwrath
Type: Water / Fighting
Species: Tadpole Pokémon
Height: 1.3 m (4′03″)
Weight: 54.0 kg (119.0 lbs.)
Interesting Facts: With its newly-gained fighting abilities, Poliwrath is more aggressive than its pre-evolutions, and is more willing to pick fights with others. It evolves from Poliwhirl when exposed to a Water Stone. It is one of Poliwag's final forms.

THE PAPER MODEL
Height: 19.9 cm/7.8 in
Width: 20.2 cm/ 8.0 in
Depth: 13.6 cm/5.4 in
Pages: 5
Pieces: 33
Level: Medium

NOTES: Build from the top down for the body, and from the hand to shoulder for arms. Attach arms when possible. Close at feet.

Download: A4 / Letter

COMBUSKEN

Posted by K

Add Comments

fighting

COMBUSKEN

256 / COMBUSKEN - Pokémon Papercraft
Name: Combusken
Type: Fire / Fighting
Species: Young Fowl Pokémon
Height: 0.9 m (2′11″)
Weight: 19.5 kg (43.0 lbs.)
Interesting Facts: They are very noisy and can often be heard squawking. In battle, their sharp cries are said to be very distracting. It evolves from Torchic starting at level 16, and evolves into Blaziken starting at level 36.

THE PAPER MODEL
Height: 18.4 cm/7.2 in
Width: 9.5 cm/ 3.7 in
Depth: 12.5 cm/4.9 in
Pages: 4
Pieces: 53
Level: Easy/Medium

NOTES: Start building from the comb, make your way down, attaching the arms as soon as possible. Glue the fur spikes to the yellow part of the body, then glue the crotch. Build the legs, starting from the feet, attach them to the body then close at the tail. Be careful while gluing the palms to the arms. Insert a coin inside its left thigh for balance.

Download: A4 / Letter

CROAGUNK

Posted by K

Add Comments

fighting

CROAGUNK

453 / CROAGUNK- Pokémon Papercraft
Name: Croagunk
Type: Poison/Fighting
Species: Toxic Mouth Pokémon
Height: 0.7 m (2′04″)
Weight: 23.0 kg (50.7 lbs.)
Interesting Facts: Whenever its middle finger glows purple, it appears to be channeling its poison via its skin and onto its hand to use its Poison moves. Fluid squeezed from its finger, although poisonous, is a significant ingredient in remedies for lower-back pain. It evolves into Toxicroak starting at level 37.

THE PAPER MODEL
Height: 17.0 cm/ 6.7 in
Width: 17.6 cm/ 6.9 in
Depth: 12.3 cm/ 4.8 in
Pages: 5
Pieces: 41
Level: Medium

NOTES: Croagunk is a simple model, but it is kinda hard to close since you can't really close it at the feet. I'd recommend closing it at the middle of the back, just leave the pieces open until you need to close it.

Start by building the head, then the arms and the legs. Finally, just attach all the pieces together by building the body.

Download: A4 / Letter

PRIMEAPE

Posted by K

Add Comments

fighting

PRIMEAPE

057 / PRIMEAPE - Pokémon Papercraft
Name: Primeape
Type: Fighting
Species: Pig Monkey Pokémon
Height: 1.0 m (3′03″)
Weight: 32.0 kg (70.5 lbs.)
Interesting Facts: Primeape has a round body covered in whitish, messy fur. Primeape's ears are triangular with pink insides, its arms and legs are colored brown and the tail it had as a Mankey has dissappeared. Primeape has metal shackles on its wrists and ankles; this is probably indicative of a method of training with weights. The forepaws seem to resemble boxing gloves, alluding to its nature as a Fighting-type Pokémon.

THE PAPER MODEL
Height: 17.0 cm/ 6.7 in
Width: 22.0 cm/ 8.7 in
Depth: 12.6 cm/ 5.0 in
Pages: 5
Pieces: 55
Level: Medium

NOTES: Build from the face back, closing at the small flat piece of the back. Once that piece is glued, attach the final fur spike right on top, hiding the closing point. Then build the arms from the tip of the hand in, gluing to the body when complete. Same with the legs, from the foot up.

The hat is optional, but adds a bit for anyone who has seen the anime ep. If made, cut the brim to be circular, rather than how it is blocky now.

This model will not stand without weight or a base. Either try to counter balance it with weight in the left hand, use a base, or do what I did- use a string to create a hand hold, and hang it by the arm/hand from it. The small niche in the hand makes the last option easy.

Download: A4 / Letter

TYROGUE

Posted by K

Add Comments

fighting

TYROGUE

236 / TYROGUE - Pokémon Papercraft
Name: Tyrogue
Type: Fighting
Species: Scuffle Pokémon
Height: 0.7 m (2'04")
Weight: 21.0 kg (46.3 lbs.)
Interesting Facts: Tyrogue are medium-sized Pokémon that resemble humans in general shape. However, he is predominantly purple in color with a brown bottom and feet which resemble short pants and shoes. There are white lines on his torso which resemble bandages. He also has these bandages on his wrists. He has three spikes on top of his head which resembles a crest, yellow irises, and circular sections on the sides of his head like protective padding.

THE PAPER MODEL
Height: 13.0 cm/ 5.1 in
Width: 10.9 cm/ 4.3 in
Depth: 9.1 cm/ 3.6 in
Pages: 2
Pieces: 41
Level: Medium/Hard

NOTES: The hands are a little tough, but other than that it's pretty straightforward. Take your time on the fingers and arms and it should be fine. Close at the waist area, or at the bottom of the feet.

Download: A4 / Letter

HITMONCHAN

Posted by K

Add Comments

fighting

HITMONCHAN

107 / HITMONCHAN - Pokémon Papercraft
Name: Hitmonchan
Type: Fighting
Species: Punching Pokémon
Height: 1.4 m (4'07")
Weight: 50.2 kg (110.7 lbs.)
Interesting Facts: Hitmonchan is a tan colored, human-shaped Pokémon. His body resembles a light purple tunic with a kilt and fists resemble red boxing gloves. His enlarged shoulders give the appearance of shoulder pads. His purple feet give the appearance of a pair of boxer shoes. Unlike his parallel evolution, Hitmonlee, he has a mouth and a visible separation between body and head.

THE PAPER MODEL
Height: 18.0 cm/ 7.1 in
Width: 13.5 cm/ 5.3 in
Depth: 10.2 cm/ 4.0 in
Pages: 3
Pieces: 36
Level: Medium

NOTES: This one is fairly easy, just follow the numbers. Will need weight or a base in order to stand.

Download: A4 / Letter

HITMONTOP

Posted by K

Add Comments

fighting

HITMONTOP

237 / HITMONTOP - Pokémon Papercraft
Name: Hitmontop
Type: Fighting
Species: Handstand Pokémon
Height: 1.4 m (4'07")
Weight: 48.0 kg (105.8 lbs.)
Interesting Facts: Hitmontop spins on his head and uses his tail and legs to smack enemies. Although Hitmontop travels faster spinning than walking, he is still capable of walking normally in which case he retracts his tail to its side.

THE PAPER MODEL
Height: 13.2 cm/ 5.2 in
Width: 14.5 cm/ 5.7 in
Depth: 10.0 cm/ 3.9 in
Pages: 3
Pieces: 58
Level: Medium

NOTES: This one is fairly easy, just follow the numbers. Will need a base in order to stand with the 'top' legs, and weight or a base to stand with the straight legs. (Numbers) indicate options to the regular Numbers. Don't use both; one or the other.
Texture included to change the eye shine if building the standing pose, but must have Pepakura to use it.
For added fun, color the base after printing.

Download: A4 / Letter - Base

MONFERNO CHIBI

Posted by K

Add Comments

fighting

MONFERNO CHIBI

391 / MONFERNO CHIBI - Pokémon Papercraft
Name: Monferno (Moukazaru)
Type: Fire / Fighting
Species: Playful Pokémon
Height: 0.9 m (2′11″)
Weight: 22.0 kg (48.5 lbs.)
Interesting Facts: When threatened, it increases the size of its flame in order to appear larger than it really is, which is useful in scaring off attacking foes. A bigger fire on its tail and a brighter blue pattern on its face means its rank in its pack is higher. It evolves from Chimchar starting at level 14 and evolves into Infernape starting at level 36.

THE PAPER MODEL
Height: 10.0 cm / 3.9 in
Width: 8.1 cm / 3.2 in
Depth: 7.5 cm / 3.0 in
Pages: 1
Pieces: 14
Level: Easy

NOTES: There's not much instructions, but the model is quite simple. Build the body and attach the arms. Glue the collar on it. Build the head and glue it on the body. Glue the ears and the tail on.

Download: A4 / Letter

MACHOKE

Posted by K

Add Comments

fighting

MACHOKE

067 / MACHOKE - Pokémon Papercraft

Name: Machoke
Type: Fighting
Species: Superpower Pokémon
Height: 1.5 m (4′11″)
Weight: 70.5 kg (155.4 lbs.)
Interesting Facts: Machoke appear as larger, tailless Machop with red marks along their muscular arms. Their faces are more reptilian than before. The marks actually look like places where the skin has stretched apart because it can barely contain its huge muscles. Machoke wear black wrestling tights for better movement and a large, golden belt with a little red P on the buckle.

THE PAPER MODEL
Height: 17.5 cm/ 6.9 in
Width: 13.7 cm/ 5.4 in
Depth: 9.4 cm/ 3.7 in
Pages: 4
Pieces: 35
Level: Medium

NOTES: Build from the head down. Cut notches for the crests in the head. Attach the arms, moving downward, and close at the bottom of the legs.

Download: A4 / Letter

Popular posts

Labels

About

Archive for 2013

BRELOOM

HITMONLEE

GALLADE

RIOLU

BLAZIKEN

MANKEY

POLIWRATH

COMBUSKEN

CROAGUNK

PRIMEAPE

TYROGUE

HITMONCHAN

HITMONTOP

MONFERNO CHIBI

MACHOKE

Blogger templates

Blogger news

Blogroll

Blog Archive

Mengenai Saya

Label